Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0044
Loop
Parts:
Bulb Type B Max.60W
(not included)
Parts Number (4592MM)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
121219
Main Fixture
Socket
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Nipple(G)
Canopy (I)
Top Loop (H)
Hex Nut (E)
Washer (F)
Collar (J)
Loop Lock (K)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Nipple(G)
Top Loop (H)
Collar (J)
1. Attach nipple to the mounting strap, then secure it with
a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the
chain. Then connect one end of the chain with the loop
by using the loop lock.
4. Secure the top loop to nipple.
5. Thread the fixture wire and fixture grounding
wire through the collar, canopy, top loop,
nipple and mounting strap.
6. Connect the other end of the chain with the
top loop by using the loop lock.
7. Pull out the outlet wires and the house
grounding wire from the outlet box. Make
wire connections by using the wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
8. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar.
9. Install bulbs(not included). See relamping label at socket area or packaging for maximum allowed
wattage.
10. Turn on the power at the main fuse or circuit breaker box.