Installation Guide

ManualsBrandsCascadia ManualsKitchen Island LightingATG10946276

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

P0029

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

120717

Page 1

Outlet Box

Housing Grounding Wire

Wire Nut

Fixture Wire

Fixture Grounding Wire

Mounting Plate

Green Grounding Screw

Fixture Mounting Screw

Lock Nut

Set Hole

Canopy

Glass Holder

Main Fixture

Dry Wall Screw

Rod

Nipple

Threaded Pipe

Ball Nut

Mounting Screw

Bulb Type A Max.100W

(not included)

Rod

Set Nipple

Swivel

Anchor

Suction Cap

Threaded Pipe

Glass Shade

6” Rod

Socket Ring Fixer

Socket Ring

Coupling

Decoration

Bulb GU10 LED Max.4W

(included)

Wood Post

Hex Nut

6” Rod

Lamp Holder

Summary of content (2 pages)

PAGE 1
P0029 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Contents of Spare Parts: Assembly Kit (1 SET) (4526MM) Glass Shade (6 PCS) (9353AT) Socket Ring (6 PCS) (4561KK) 6” Rod (2 PCS) (4566RR) 12” Rod (8 PCS) (4561RR) 1. Thread two fixture mounting screws to the mounting plate, and secure them with two lock nuts. 2. Place the mounting plate to the outlet box and mark the target on the wall from the set hole for drilling two holes. Remove the mounting plate from the outlet box.