Installation Guide

ManualsBrandsCascadia ManualsKitchen Island LightingATG10946294

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

PD55436 / PD55536 / PD55636 / PD55736

Page 1

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Outlet Box

Housing Grounding Wire

Wire Nut

Fixture Wire

Fixture Grounding Wire

Mounting Plate

Green Grounding Screw

Screw

Lock Nut

Upper Canopy

Lower Canopy

Suspension Rod

Frame

Hanger Bar

Glass Holder

Glass Shade

Socket Ring

Frame

Big Loop

Small Loop

Loop Lock

Chain

Washer

Hex Nut

Tube Assembly

Hex Nut

Threaded Pipe

Main Holder

Washer

Coupling

Bolt Nut

Mounting Screw

Clip

Frame

Set Screw

Twist the locking

tube to open or

close loop lock

Loop lock

P-W(6pcs)

(For All Items)

P-R(6pcs)

(PD55436)

P-U(6pcs)

P-W(6pcs)

(PD55536)

P-Z(6pcs)

(PD55636)

P-S(6pcs)

(PD55736)

P-U(12pcs)

(For All Items)

There are labels attached on the back of each silhouette,

such as P-Z, P-W, P-U, P-R and P-S.

Figure.1

Figure.2

Figure.3

Figure.4

P-Z

P-W

P-U

Bulb Type A Max.100W

(not included)

100329

Figure.2-a

PD55436

PD55536

PD55736

P-U

P-W

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS PD55436 / PD55536 / PD55636 / PD55736 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Outlet Box Housing Grounding Wire Screw Mounting Plate Green Grounding Screw Fixture Grounding Wire Mounting Screw Upper Canopy Lock Nut Wire Nut Fixture Wire Figure.
PAGE 2
1. Install the silhouettes onto the frame. (See Figure 1 & 2) a. Take a silhouette and place it onto the frame with the hole in the frame aligning the slot in the clip of the silhouette, secure it with a set screw. (See Figure 2-a) b. Repeat with the other silhouettes. c. There are labels attached on the back of each silhouette, such as P-Z, P-W, P-U, P-R and P-S. Please follow the sequence shown in Figure 2 to install the silhouettes onto the frame. d.