Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0064 / H0068
Loop
Parts:
Bulb Type A Max.100W
(not included)
Parts Number (4761MM For H0064)
(4760MM For H0068)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
130621
Main Fixture
Socket
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Nipple(G)
Canopy (I)
Top Loop (H)
Hex Nut (E)
Washer (F)
Collar (J)
Loop Lock (K)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Nipple(G)
Top Loop (H)
Collar (J)
Parts Number (4761BB For H0064)
(4758BB For H0068)
Parts Number (9456EW)
Ball Nut (M) (X5)
Glass Shade (N) (X5)
Glass Holder
Socket Ring
Glass Shade (N)
Ball Nut (M)
Metal ring
1. Attach the nipple to the mounting strap,
then secure it with a washer and hex nut.
2. Attach the mounting strap to the outlet box
by using two mounting screws.
3. Secure the top loop to the nipple.
4. Attach the loop to the set nipple of the
main fixture.
5. Adjust the arms of the fixture according to
the drawing of the package. Then fix them
to the metal ring by using the screws and
ball nuts.
Important:
a.The arms should be positioned with
equal distance between them.
b. The arms should be fixed securely.
6. Choose the length of the chain you need, then weave the fixture wire and the fixture grounding
wire through the chain, collar and canopy.
7. Connect one end of the chain with the loop by using a loop lock.
8. Connect the other end of the chain with the top loop by using another loop lock.
9. Thread the fixture wire and fixture grounding wire through the top loop, nipple and mounting strap.
10. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using
the wire nuts:
---The smooth wire (marked) from the fixture to the black wire from the power source.
---The ridged wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
Set Nipple
Screw