Installation Guide

ManualsBrandsCascadia ManualsChandeliersATG11554259

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1.

Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

H0065 / H0069

Loop

Parts:

Bulb Type A Max.100W

(not included)

Parts Number (4763MM For H0065)

(4762MM For H0069)

Mounting Strap (A)

Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (D)

Canopy (I)

Loop Lock (K)

Chain (L)

130621

Main Fixture

Socket

Outlet Box

House Grounding Wire

Wire Nut (D)

Fixture Wire

Fixture Grounding Wire

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

Nipple(G)

Canopy (I)

Top Loop (H)

Hex Nut (E)

Washer (F)

Collar (J)

Loop Lock (K)

Chain (L)

Hex Nut (E)

Washer (F)

Nipple(G)

Top Loop (H)

Collar (J)

Parts Number (4761BB For H0065)

(4758BB For H0069)

Parts Number (9456EW)

Ball Nut (M) (X6)

Glass Shade (N) (X9)

Glass Holder

Socket Ring

Glass Shade (N)

Ball Nut (M)

Metal ring

1. Attach the nipple to the mounting strap,

then secure it with a washer and hex nut.

2. Attach the mounting strap to the outlet box

by using two mounting screws.

3. Secure the top loop to the nipple.

4. Attach the loop to the set nipple of the

main fixture.

5. Adjust the arms of the fixture according to

the drawing of the package. Then fix them

to the metal ring by using the screws and

ball nuts.

Important:

a. The arms of each tier (bottom, middle)

should be positioned with equal

distances between them.

b. The arms should be fixed securely.

6. Choose the length of the chain you need, then weave the fixture

wire and the fixture grounding wire through the chain, collar and

canopy.

7. Connect one end of the chain with the loop by using a loop lock.

8. Connect the other end of the chain with the top loop by using another

loop lock.

9. Thread the fixture wire and fixture grounding wire through the top loop,

nipple and mounting strap.

10. Pull out the outlet wires and house grounding wire from the outlet box.

Make wire connections using the wire nuts:

Set Nipple

Screw

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS H0065 / H0069 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
---The smooth wire (marked) from the fixture to the black wire from the power source. ---The ridged wire (unmarked) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with a wire nut. Carefully put the wires back into the outlet box. 11. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar. 12.