Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0073
Loop
Parts:
Bulb Type B Max.60W
(not included)
Parts Number (4774MM)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
130611
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Nipple(G)
Canopy (I)
Top Loop (H)
Hex Nut (E)
Washer (F)
Collar (J)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Nipple(G)
Top Loop (H)
Collar (J)
1. Attach nipple to the mounting strap, then secure it with a washer
and hex nut.
2. Attach the mounting strap to the outlet box by using two mounting
screws.
3. Attach loop to the center body.
4. Adjust the arms of the fixture according to the drawing of the
package.
Important:
a. The arms of each tier (bottom, middle) should be
positioned with equal distances between them.
b. The arms should be fixed securely.
5. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain.
6. Secure the top loop to nipple.
7. Thread the fixture wire and fixture grounding wire
through the collar, canopy, top loop, nipple and
mounting strap.
8. Connect the other end of the chain with the top
loop by using the loop lock.
9. Pull out the outlet wires and the house grounding
wire from the outlet box. Make wire connections
by using the wire nuts:
---The smooth wire (marked) from the fixture to the black wire
from the power source.
---The ridged wire (unmarked) from the fixture to the white wire
from the power source.
---Attach the fixture grounding wire to the mounting strap with
the green grounding screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the top loop,
then secure it with the collar.
Decorative Cover
Center Body
Finial