Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Parts:
Parts Number (4904MM)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
131219
Hex Nut (E)
Washer (F)
Nipple(-a)(G)
Top Loop (H)
Collar (J)
Parts Number (9540EW)
Glass Shade (M) (X5)
H0082
1. Attach nipple(-a) to the mounting strap, then secure
it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to the nipple(-a).
4. Secure the loop onto the stem.
5. Adjust the arms of the main fixture according to the
drawing of the package.
Important:
a. The arms should be positioned with equal
distances between them.
b. The arms should be fixed securely.
6. Choose the length of the chain you need, then
weave the fixture wire and the fixture grounding
wire through the chain, collar and canopy.
7. Connect one end of the chain with the loop by using
a loop lock.
8. Connect the other end of the chain with the top loop
by using another loop lock.
9. Thread the fixture wire and fixture grounding wire
through the top loop, nipple and mounting strap.
Loop
Canopy (I)
Loop Lock(K)
Loop Lock (K)
Collar (J)
Chain (L)
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Nipple (-a) (G)
Top Loop (H)
Hex Nut (E) & Washer (F)
Finial
Arm
Socket Ring
Glass Shade (M)
Glass Holder
Bulb Type A Max.100W
(not included)
Cover
Fixture
Nipple(-b)
Finial assembly
Stem