Installation Guide

131206
A: 20"
B: 8-1/2"
C: 6-1/4"
A
B
C
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
4. Attach the back plate to the mounting plate by inserting the headless screws, then secure it with
two ball nuts.
5. Attach the glass shades onto the glass brackets, secure it with socket rings, using supplied socket
fixer.
6. Install bulbs (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
7. Turn on the power at the main fuse or circuit breaker box.