Installation Guide

For Semi-Flush
For Pendant:(See Fig.1)
1. Attach nipple(-a) to the mounting strap, then secure it with
a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Thread the fixture wire and fixture grounding wire through
the loop, then secure the loop onto nipple(-b).
4. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the chain
links. Connect one end of the chain link with the loop by
using the loop lock.
5. Secure the top loop to nipple(-a).
6. Thread the fixture wire and fixture grounding wire through
the collar, canopy, top loop, nipple(-a) and mounting strap.
7. Connect the other end of the chain link with the top loop by
using the loop lock.
8. Follow step 3 as for Semi-Flush.
9. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
10. Follow steps 5~8 as for Semi-Flush.
Nipple(-b)
Fixture Wire
Fixture
Chain
Mounting Screw
Nipple(-a)
Fixture Grounding Wire
Collar
Top Loop
Canopy
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
Loop
House Grounding Wire
Loop Lock
Loop Lock
Mounting Parts For Pendant
Fig.1
070206
1. Attach two headless screws to the mounting strap, then
secure them with four lock nuts (two on each side of the
mounting strap). Adjust the length of the headless screws
if necessary.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Cut the redundant wires if necessary. Pull out the outlet
wires and the house grounding wire from the outlet box.
Make wire connections with wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully tuck the wires back into the outlet box.
4. Unscrew two bolt nuts from fixture canopy. Attach the
fixture canopy to the mounting strap by inserting the
headless screws, then secure them with the bolt nuts.
5. Screw the stem into the coupling of the socket, then
secure it with a washer and hex nut.
6. Install bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
7. Carefully attach the glass shade upward to the pan by
inserting the stem, then secure them with a metal pad
and hex nut. Attach the cover to the glass shade, secure
it with the finial.
8. Turn on the power at the main fuse or circuit breaker box.
Lock Nut
Outlet Box
Wire Nut
Headless Screw
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Mounting Screw
Fixture Wire
Fixture Canopy
Bolt Nut
Pan
Socket
Coupling
Washer & Hex Nut
Stem
Glass Shade
Metal Pad
Hex Nut
Cover
Finial
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
BG-CFU180