Installation Guide

130611
A: 16-1/2"
B: 14"
A
B
7. Place the glass shade over the main fixture body, making sure the nipple feeds through its center
hole, then secure it with a metal cap(Ø48mm) and hex nut.
8. Slide the cover up to the glass shade, and secure it with finial.
9. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
using the wire nuts:
---The black (hot) wire from the fixture to the black (hot) wire from the power source.
---The white (neutral) wire from the fixture to the white (neutral) wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then
connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting plate, and secure it with two ball nuts.
11. Turn on the power at the main fuse or circuit breaker box.