Installation Guide

1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Adjust the arms of the fixture according to the drawing of the package. Then fix them to the fixture
by using the set screw.
Important:
a. The arms should be positioned with equal distances between them.
b. The arms should be fixed securely.
3. Attach two fixture mounting screws to the mounting strap, and secure them with two lock nuts.
Adjust the length of the fixture mounting screws if necessary.
4. Attach the mounting strap to the outlet box by using two mounting screws.
5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
by using the wire nuts:
---Connect the black wire from fixture to the black wire from power source.
Ball Nut (G)
Canopy
Outlet Box
House Grounding Wire
Wire Nut (E)
Fixture Mounting Screw (D)
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Lock Nut (S)
Bulb Type A Max.60W
(not included)
Hex Nut (H)
Washer (I)
Arm
Nipple (J)
Set Screw
Socket
Coupling
Washer (I)
Nipple (J)
Main Fixture
Glass Shade (R)
Big Rubber Pad (K)
Big Metal Pad (L)
Hex Nut (H)
Cover (M)
Finial (F)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0057 / C0059
Parts:
131217
Parts Number (4973MM For C0057)
(4980MM For C0059)
Parts Number (9558EW)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (E)
Glass Shade (R) (X1)
Mounting Strap (A)
Fixture Mounting
Screw (D)
Ball Nut (G)
Rubber Pad (K)
Metal Pad (L)
Cover (M)
Finial (F)
Small Cap(O)
Tube(N)
Hex Nut (H)
Rubber Pad (K)
Metal Pad (L)
Small Cap (O)
Tube (N)
Big Rubber Pad (P)
Big Metal Pad (Q)
Lock Nut (S)