Installation Guide

ManualsBrandsCascadia ManualsFlush Mount LightingPoirot 14.5-in New Bronze Transitional incandescent Semi-Flush Mount Light

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Adjust the arms of the fixture according to the drawing of the package.

Important:

a. The arms should be positioned with equal distances between them.

b. The arms should be fixed securely.

3. Attach two fixture mounting screws to the mounting strap. Secure them with two lock nuts. Adjust

the length of the fixture mounting screws if necessary.

4. Attach the mounting strap to the outlet box by using two mounting screws.

5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections

by using the wire nuts:

---Connect the black wire from fixture to the black wire from power source.

Ball Nut (G)

Canopy

Outlet Box

House Grounding Wire

Wire Nut (E)

Fixture Mounting Screw (D)

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

Bulb Type A Max.60W

(not included)

Hex Nut (H)

Washer (I)

Arm

Nipple (J)

Lock Nut (O)

Socket

Coupling

Washer (I)

Nipple (J)

Main Fixture

Glass Shade (N)

Hex Nut (H)

Cover (M)

Finial (F)

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0065

Parts:

131218

Parts Number (4909MM)

Parts Number (9544EW)

Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (E)

Glass Shade (N) (X1)

Mounting Strap (A)

Fixture Mounting

Screw (D)

Ball Nut (G)

Rubber Pad (K)

Metal Pad (L)

Cover (M)

Finial (F)

Hex Nut (H)

Rubber Pad (K)

Metal Pad (L)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0065 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
---Connect the white wire from fixture to the white wire from power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put wires back into the outlet box. 6. Attach the canopy to the mounting strap, and secure it with two ball nuts. 7. Attach nipple to the coupling of the socket, and secure it with a washer and hex nut. 8. Install bulbs (not included).