Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0079
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
or circuit
box.
141119
Mounting Plate (A)
Green Grounding
Screw (C)
Fixture Mounting
Screw(E)
Ball Nut(G)
Mounting Screw (B)
Wire Nut (D)
Lock Nut (F)
Outlet Box
House Grounding Wire
Fixture Grounding
Wire
Wire Nut (D)
Fixture Mounting
Screw (E)
Fixture
Socket
Mounting Plate (A)
Green Grounding
Screw (C)
Mounting Screw (B)
Pure Shell(H)
Pure Shell(H)
Lock nut (F)
Ball nut(G)
1. Remove the mounting plate from fixture by unscrewing
two ball nuts.
2. Attach the mounting plate to the outlet box by using
two mounting screws.
3. Pull out the source wires from the outlet box. Make
wire connections using wire nuts as follows:
---Connect the hot wire (usually black insulation) from
the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from
the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation
or bare wire) to the mounting plate with the green
grounding screw. Then connect it to the house grounding
wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the fixture to the mounting plate by inserting two
fixture mounting screws into the holes, then tighten the
fixture by screwing the ball nuts into the fixture mounting screw.
5. Install bulbs (not included). See relamping label at socket area
or packaging for maximum allowed wattage.
Bulb Type B Max.60W
(not included)
Installation Steps
Turn on the power at fuse or circuit box.