Installation Guide

141212

A: 13"

B: 6"

4. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes, and rotate the ceiling

pan until it locks in place. Then secure the screws tightly. (See Fig.1)

5. Screw the threaded pipe into the coupling, then secure it with a washer and a hex nut.

NOTE:Depth of threaded pipe may need to be adjusted to properly fit glass shade, decorative cup and finial.

6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.

7. Attach the glass shade to the ceiling pan by inserting the threaded pipe, then secure it with a metal pad and hex nut.

8. Slip the decorative cup up through the threaded pipe, secure it with a finial.

Turn on the power at fuse or circuit box.

Spare Parts List:

Assembly Kit

5277MM (1 SET)

Glass Shade

9696EW(1PC)

The following parts are available for re-order if damaged or missing.

Hex Nut (H)

Washer (I)

Threaded Pipe (J)

Short Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (E)

Mounting Strap (A)

Long Screw (D)

Metal Pad (K)

Decorative Cup (G)

Finial (F)