Installation Guide

150624

Turn on the power at fuse or circuit box

6. Attach threaded pipe to the coupling of the socket, and then secure it with a washer and hex nut.

NOTE:Depth of threaded pipe may need to be adjusted to properly fit glass shade, decorative cup and finial.

7. Install bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

8. Slip the tube, the tube cap with the open side facing upward, a metal pad , a rubber pad and the glass shade up through

threaded pipe, secure them with a rubber pad, a metal pad and a hex nut.

9. Slide the decorative cup up to glass shade, and then secure it with the finial.

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Mounting Hardware

5374MM (1 SET) FOR C0102

5376MM (1 SET) FOR C0103

A: 14"

B: 11-1/2"

Glass Shade

9726EW(1PC)

Assembly Kit

5375AA (1 SET) FOR C0102

5377AA (1 SET) FOR C0103

Hex Nut (I)

Threaded Pipe (H)

Washer (J)

Decorative Cup (O)

Tube Cap (L)

Tube (K)

Rubber Pad (M)

Metal Pad (N)

Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (F)

Lock Nut (E)

Mounting Strap (A)

Long Screw (D)

Ball Nut (G)

Finial (P)