Installation Guide

ManualsBrandsCascadia ManualsCeiling LightsBelleville 14-in W Oil rubbed bronze Frosted Glass Semi-Flush Mount Light

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0102 / C0103

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

150624

Turn off the power at fuse or circuit box.

Installation Steps

Fixture

Ball Nut(G)

Arm

Thread the long screws through mounting strap, and then secure

them with two lock nuts. Adjust the length of long screws if necessary.

2. Attach the mounting strap to the outlet box by using two mounting

screws.

3. Adjust the arms of the fixture according to the picture on the package.

Important:

a. The arms should be positioned with equal distances between them.

b. The arms should be fixed securely.

4. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:

---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.

---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.

---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green

grounding screw, and then connect it to the house grounding wire with the wire nut.

Carefully put the wires back into the outlet box

5. Attach the fixture to the mounting strap, and then secure it with two ball nuts.

Finial(P)

Decorative Cup(O)

Rubber Pad(M)

Metal Pad(N)

Rubber Pad(M)

Metal Pad(N)

Hex Nut(I)

Tube(K)

Tube Cap(L)

Glass Shade

Bulb Type A Max.100W

(not included)

Hex Nut (I)

Threaded Pipe (H)

Washer (J)

Decorative Cup (O)

Tube Cap (L)

Tube (K)

Rubber Pad (M)

Metal Pad (N)

Outlet Box

House Grounding Wire

Wire Nut (F)

Long Screw (D)

Mounting Strap (A)

Lock Nut (E)

Green Grounding Screw (C)

Mounting Screw (B)

Socket

Coupling

Hex Nut(I)

Washer(J)

Threaded Pipe(H)

Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (F)

Lock Nut (E)

Mounting Strap (A)

Long Screw (D)

Ball Nut (G)

Finial (P)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0102 / C0103 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
6. Attach threaded pipe to the coupling of the socket, and then secure it with a washer and hex nut. NOTE:Depth of threaded pipe may need to be adjusted to properly fit glass shade, decorative cup and finial. 7. Install bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage. 8.