Installation Guide

151028

Washer (K)

A: 13"

B: 6"

4. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes. Rotate the ceiling pan

until it is locked in place, and then secure the long screws tightly. (See Fig.1)

5. Attach the threaded pipe into the coupling, and then secure it with a washer and a hex nut.

NOTE:Depth of threaded pipe may need to be adjusted to properly fit glass shade, decorative cup and finial.

6. Install bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

7. Attach the glass shade to the ceiling pan by inserting the threaded pipe, then secure it with a metal pad and a hex nut.

8. Slip the decorative cup up through the threaded pipe, secure it with the finial.

Turn on the power at fuse or circuit box.

Spare Parts List:

Mounting Hardware

5460MM (1 SET)

Glass Shade

9768FO(1PC)

Assembly Kit

5461AA (1 SET)

The following parts are available for re-order if damaged or missing.

Hex Nut (H)

Threaded Pipe (I)

Short Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (E)

Mounting Strap (A)

Long Screw (D)

Metal Pad (J)

Decorative Cup (G)

Finial (F)