Installation Guide

ManualsBrandsCascadia ManualsFlush Mount LightingLeo 12-in Satin Nickel Transitional integrated Led Flush Mount Light

Important to Know:

1. If you are not familiar with state and local electrical

codes, it is recommended that you consult with a

qualified electrician.

2. This fixture requires a 120 VAC, 60 Hz power

source. Using non-replaceable LED bulb.

3. Mobile device requirements:

IOS 8.x or later.

Android v4.4 or later.

Device must also have Bluetooth version 4.0 or

later.

Maximum Wattage: 18 W for C0124&C0125

25 W for C0126&C0127

Working Temperature Range: 14°F ~ 122°F

Features:

1. Bluetooth APP controls.

2. Energy saving LED fixture.

3. Customize your color temperature from Warm White

to Daylight.

4. Sync multiple units.

5. Additional wall switch controlled presets.

6. Set on/off schedule.

7. IOS & Android™ compatible.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

C0124 / C0125 / C0126 / C0127

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Turn off the power at fuse or circuit box

Mounting Strap (A)

Green Grounding

Screw (C)

Long Screw (D)

Mounting Screw (B)

Wire Nut (E)

Ceiling Pan

Stud

Driver with Bluetooth

Module

Plastic Shade

Long Screw

Key Hole Slot

Slot

LED Module

Fig.1

1. Remove the plastic shade from ceiling pan.

2. Attach the two long screws to the holes on the mounting strap.

Thread them in part way: 2 to 3 turns only.

3. Attach the mounting strap to the outlet box using two mounting

screws.

Warning: LED electronics can be damaged by electro static discharge (ESD)shock. Before

installation, discharge yourself by touching a grounded bare metal surface to remove this

hazard. To avoid damage, do not touch the LED module.

Page 1 / 8

Outlet Box

House Grounding Wire

Wire Nut (E)

Long Screw (D)

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

160819

Installation Steps

Summary of content (8 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0124 / C0125 / C0126 / C0127 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Warning: LED electronics can be damaged by electro static discharge (ESD)shock. Before installation, discharge yourself by touching a grounded bare metal surface to remove this hazard.
PAGE 2
4. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows: ---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source. ---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
PAGE 3
Troubleshooting Problem The fixture will not light. The fixture is not responding to the APP. The APP is not turning on the light fixture. The APP is not finding the light fixture. Possible Cause Solution The power is off. Ensure the power supply is on. The circuit breaker is off. Ensure the circuit breaker is in the on position. Bluetooth is not turned on. Turn Bluetooth “on” in the device’s settings. The Power to the light is turned off. Turn on the power to the light.
PAGE 4
Bluetooth Control User Guide Setting for single light through mobile device (Take IOS for example as below. Android will be slightly different). Fig.1 1. Search “Leo LED” at Apple store or Android Google Play. Download the “Leo LED” APP onto the device. Start the APP. Fig.2 2. Turn on Bluetooth to allow “Leo LED” to connect to accessories. Press “Settings” and turn on Bluetooth. Fig.5 Fig.4 4. Turn the light fixture power back on. Bluetooth will search for the light fixture.
PAGE 5
Fig.8 Fig.7 7. Select “Scene” to choose default scenes or customize your own. 8. Select “Settings” to set on/off schedule, or change the name of the light. Note: maximum 9 characters for light name. Setting for multiple lights through mobile device (Take Android system for example as below. IOS will be slightly different) Fig.9 1. Select the multiple lights that have been found, then press “OK”. Fig.10 2. Press and hold one light, then drag to another light to create a group.
PAGE 6
4. Press and hold group light icon to rename Group. Fig.14 Fig.13 Fig.12 5. Select Group1 to control on/off, color temperature and brightness. Also scenes and setting for lights group. 6. Select “ ” icon to change the setting of single light or Group. Sharing light fixtures with another device User may share or receive existing light fixtures on another device through following instructions: Note: This is the only way a light can be added to new devices without resetting light fixture.
PAGE 7
B: Add Lamps by Share Fig.17 1. Select top left “ ” icon and select “Add Lamps By Share”. Fig.18 2. Scan the QR code generated from another device to gain access to the light fixtures. Reset Light Fixture Fig.19 1. Turn off the power of light fixture then select “Add” icon. Fig.20 2. Turn the light fixture power back on. Bluetooth will search for the light fixture. Select top right “ ” icon if the device stops searching for the light fixture.
PAGE 8
Fig.22 Fig.21 3. Select the light fixtures you want to reset by pressing “Reset”. 4. Select “OK”, then turn the light fixture “OFF” and “ON” immediately to complete the reset.