Installation Guide

161010

A: 13"

B: 6-1/2"

4. Attach the ceiling pan to the mounting strap by inserting two fixture mounting screw heads into the key

holes, and rotate the pan until it locks in place. Then secure the screws tightly. (See Fig.1)

5. Screw the tube with the threaded pipe head into the coupling until tightened.

6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

7. Secure the nipple into the tube. Adjust the nipple to the suitable location.

Note: Depth of the nipple may need to be adjusted to properly fit glass shade,

metal pad, hex nut, cover and finial.

8. Attach the glass shade to the pan by inserting the nipple and tighten it with metal pad and hex nut.

Caution: Do not over tighten, breakage of glass shade could be occurred.

9. Slip the cover up through the nipple, secure it with a finial.

10. Turn on the power at the main fuse or circuit breaker box.

Mounting Hardware

5654MM (1SET)

Glass Shade

9852CB

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Mounting Screw (B)

Green Grounding

Wire Nut (E)

Mounting Strap (A)

Fixture Mounting

Screw (D)

Metal Pad (J)

Hex Nut (K)

Cover (G)

Finial (F)

Turn on the power at fuse or circuit box

Nipple (H)

Tube W/Threaded Pipe (I)