Installation Guide

ManualsBrandsCascadia ManualsCeiling LightsEtrienne 18.25-in French Bronze Traditional Incandescent Semi-flush Mount Light

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0139

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

161206

Page 1

Mounting Strap (A)

Mounting Screw (B)

Green Grounding

Screw (C)

Hardware Package (included):

Crystal drop A (H)

16 SETS

Crystal drop B (I)

16 SETS

Crystal drop C (J)

16 SETS

Crystal drop D (K)

1 SET

Fixture Mounting

Screw(E)

Wire Nut (D)

Lock Nut (F)

Ball Nut (G)

Mounting Strap (A)

Mounting Screw (B)

Green Grounding

Screw (C)

Outlet Box

Housing Grounding Wire

Fixture Grounding Wire

Canopy

Cap

Pipe

Hex Nut

Threaded Pipe

Washer

Fixture Mounting

Wire Nut (D)

Lock Nut (F)

Ball Nut (G)

Crystal drop A (H)

Crystal drop B (I)

Crystal drop C (J)

Crystal drop D (K)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0139 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Thread the fixture mounting screws through mounting strap, and then secure them with two lock nuts. Adjust the length of fixture mounting screws if necessary. 2. Attach mounting strap to the outlet box using two mounting screws. 3. Screw the threaded pipe into the coupling on the top of the fixture, and secure it with a washer and a hex nut. Then slip the pipe, cap and canopy down through the nipple, and secure them with a washer and hex nut. 4. Pull out the source wires from the outlet box.