Installation Guide

171106

A13:"

4 Attach the ceiling pan to the mounting strap by inserting two. fixture mounting screw heads into the

key holes and rotate the pan until it is locked in place Then secure the screws tightly. See Fig 1,..()

5 Screw the tube with the threaded pipe head. into the coupling until tightened.

6 Install bulbs notincluded See relamping label at socket area or packaging for maximum allowed.().

wattage.

7 Secure the nipple into the tube Adjust the nipple to the suitable location.. .

Note Depth of the nipple may need to be adjusted to properly fit glass shade metal pad: ,,

hex nut, cover and finial.

8 Attach the glass shade to the pan by inserting the nipple and tighten it with metal pad and hex nut. .

Note: Do not over tighten, breakage of glass shade could be occurred.

9 Slip the cover up through the nipple secure it with a finial.,.

Mounting Hardware

5757MM 1SET()

Glass Shade

9852CB

The following parts are available for re order if damaged or missing-.

Spare Parts List:

Mounting Screw (B)

Wire Connector ( )E

Mounting Strap A()

Fixture Mounting

Screw D()

Metal Pad J( )

Hex Nut K()

Cover G()

Finial F()

Turn on the power at fuse or circuit box

Nipple H()

Tube W Threaded Pipe I/()

Green Grounding

Screw (C)

B 6 1/2:"