Installation Guide

Hardware Package (included):
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
171206
Long Screw (A)
Wire Connector (B)
Turn on the power at fuse or circuit box.
Installation Steps
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Warning: LED electronics can be damaged by electro static discharge (ESD)shock. Before
installation, discharge yourself by touching a grounded bare metal surface to remove this
hazard. To avoid damage, do not touch the LED module.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
4.Attach the ceiling pan to the outlet box by inserting two
long screws(A) head into the key holes,and then rotate
the ceiling pan until it is locked in place, finally secure
the long screws tightly with screwdriver(not included).
3.Connect the black to black(power),white to white(neutral)
and green/yellow wire to ground wire with supplied wire
connectors(B).Tuck all wires into outlet box.
5.Attach the plastic shade to the ceiling pan, turn latches
until they are closed.
2.Attach the two long screws(A) to the holes on outlet
box,thread them in part way, 2 to 3 turns only.
1. Turn the latches and remove the plastic shade from
the ceiling pan.
C0155/C0157/C0165/C0167
WARNING:
Outlet Box
Long Screw(A)
Wire Connector (B)
Ceiling Pan
Plastic Shade
Latche
(C0155/C0157: two latches)
(C0165/C0167: four latches)
Ground Wire