Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

C0171

NOTES:1. Before installing, consult local electrical codeds for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Mounting Plate(A) Mounting Screw (B) Green Grounding Fixture Mounting

Wire Connector

(D)

Lock Nut (F)

Screw (C) Screw (D)

Ball Nut (G) Pure Shell(H) Fishing Line(I)

170922

GND

Fixture

Bulb Type B Max.

40W(not included)

Pure Shell(H)

Socket

Outlet Box

Mounting Plate(A)

Housing Wire

Mounting Screw(B)

Fixture Wire

Fixture Mounting Screw(D)

Wire Connector( E)

Fixture Grounding Wire

Ball Nut(G)

Housing Grounding Wire

Green Grounding Screw(C)

Lock Nut(F)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS C0171 NOTES:1. Before installing, consult local electrical codeds for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1.Cut the “H” plastic buckles with scissor when take down the PE bags. (See Fig.1) 2. Remove the mounting plate from fixture by unscrewing two ball nuts. 3.Attach the mounting plate to the outlet box by using two mounting screws. 4. Pull out the source wires from the outlex box. Make wire connections using wire connectors as follows: ---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.