Installation Guide

ManualsBrandsCascadia ManualsCeiling LightsYellowstone 18.5-in Burnished Bronze Rustic Incandescent Semi-flush Mount Light

For Pendant:

1. Attach the nipple-1 to the mounting strap, and then secure

with a washer and a hex nut.

2. Attach the mounting strap to the ceiling box by using two

mounting screws.

3. Choose the certain length of the chain you need, and then weave

the fixture wire and the fixture grounding wire through the chain.

Then connect one end of the chain with the loop by using the loop

lock.

4. Secure the top loop to the nipple-1 tightly.

5. Thread the fixture wire and fixture grounding wire through the

collar, canopy-1, top loop, nipple-1 and mounting strap in order.

6. Connect the other end of the chain with the top loop by using

the loop lock.

1. Install the silhouettes onto the metal ring.

a. Take a silhouette and place it onto the metal ring with the hole in the

metal ring aligning the slot in the clip of the silhouette, secure it with

a set screw. (See Figure 1)

b. Repeat with the other silhouettes.

c. Please follow the sequence shown in Figure 2 to install the silhouettes

onto the metal ring.

d. You can install the silhouettes which marked P-R (for CF55418) or

marked P-C & P-B (for CF55518) or marked P-S (for CF55718) to

the locations of silhouettes which marked P-E (for CF55618) to

replace them. (See Figure 2-a/b/c)

Fixture Wire

Chain

Mounting Screw

Nipple-1

Fixture Grounding Wire

Collar

Top Loop

Canopy-1

Mounting Strap

Green Grounding Screw

Hex Nut

Wire Nut

Washer

Outlet Box

House Grounding Wire

Loop Lock

Loop-1

Fixture

Suspension Rod

Hook

Glass shade

Hook

Metal Ring

Loop-3

Hook

Loop-2

Loop Lock

Fig.3

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

READ AND SAVE THESE INSTRUCTIONS

CF55418 / CF55518 / CF55618 / CF55718

End Cap

Set Screw

Clip

Metal Ring

P-C

Figure 2Figure 1

P-C

P-E

P-B

P-C

P-E

P-C

P-E

P-B

Parts for

CF55518

P-B

P-C

Figure 2-b

Parts for

CF55418

P-R

Figure 2-a

P-S

Figure 2-c

Parts for

CF55718

100611

Page 1

Bulb Type A Max.100W

(not included)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS CF55418 / CF55518 / CF55618 / CF55718 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Outlet Box 1. Install the silhouettes onto the metal ring. a.
PAGE 2
7. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections using the wire nuts: ---Connect the smooth wire (marked) from the fixture to the black wire from the power source. ---Connect the ridged wire(unmarked) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then connect it to the house grounding wire with a wire nut. Carefully put the wires back into the outlet box.