Installation Guide
1. Attach the nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Choose the length of the chain that you need, then weave
the fixture wire and the fixture grounding wire through
the chain. Then connect one end link of the chain with
the loop by using the loop lock.
4. Secure the top loop to the nipple tightly.
5. Thread the fixture wire and fixture grounding wire through
the collar, canopy, top loop, nipple and mounting strap.
6. Connect the link on the other end of the chain with the top
loop by using the loop lock.
7. Pull out the outlet wires and the house grounding wire from
the outlet box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the black
wire from the power source.
---The ridged wire (unmarked) from the fixture to the white
wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
8. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
9. Attach the glass shade to the glass holder, then secure
it with the socket ring, using supplied wrench.
10. Install a bulb (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
11. Turn on the power at the main fuse or circuit breaker box.
Fixture Wire
Chain
Mounting Screw
Nipple
Fixture Grounding Wire
Collar
Top Loop
Canopy
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
House Grounding Wire
Loop Lock
Loop Lock
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
CP-PDD060
Glass Holder
Glass Shade
Socket Ring
Wrench
Bulb Type A Max.60W
(Not Included)
120920