Installation Guide

ManualsBrandsCascadia ManualsPendant LightingCapri Black Walnut Single Traditional Tinted Glass Cone Pendant Light

1. Attach the nipple to the mounting strap, then secure it

with a washer and hex nut.

2. Attach the mounting strap to the outlet box by using

two mounting screws.

3. Choose the length of the chain that you need, then

weave the fixture wire and the fixture grounding wire

through the chain. Then connect one end link of the

chain with the hook by using the loop lock.

4. Secure the top loop to the nipple tightly.

5. Thread the fixture wire and fixture grounding wire

through the collar, canopy, top loop, nipple and

mounting strap.

6. Connect the link on the other end of the chain with the

top loop by using the loop lock.

7. Pull out the outlet wires and the house grounding wire

from the outlet box. Make wire connections using the

wire nuts:

---The smooth wire (marked) from the fixture to the

black wire from the power source.

---The ridged wire (unmarked) from the fixture to the

white wire from the power source.

---Attach the fixture grounding wire to the mounting

strap with the green grounding screw. Then connect

it to the house grounding wire with a wire nut.

Carefully tuck the wires back into the outlet box.

8. Attach the canopy to the mounting strap by inserting

the top loop, then secure it with the collar.

9. Attach the glass shade to the glass holder, then secure

it with the socket ring.

10. Install a bulb (not included). See relamping label at

socket area or packaging for maximum allowed

wattage.

11. Turn on the power at the main fuse or circuit breaker

box.

Fixture Wire

Chain

Mounting Screw

Nipple

Fixture Grounding Wire

Collar

Top Loop

Canopy

Mounting Strap

Green Grounding Screw

Hex Nut

Wire Nut

Washer

Outlet Box

House Grounding Wire

Loop Lock

Hook

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

CP-PDD150

Glass Holder

Glass Shade

Socket Ring

Bulb Type A Max.100W

(Not Included)

120920