Installation Guide

1. Take out the parts from the hardware
package For Semi-Flush. (See Fig. 7)
2. Attach two screws to the mounting strap,
and secure it with two lock nuts. Adjust the
length of the screws if necessary.
(See Fig. 7)
3. Attach the mounting strap to the outlet box
by using two mounting screws. (See Fig. 7)
4. Thread the fixture wires through the cap,
coupling, hex nut, long nipple, big tube, cap,
canopy, metal pad, washer, grounding pad
and another hex nut. (See Fig. 7)
5. Secure the coupling onto the nipple on the
top of the light kit. Then secure the long
nipple into the coupling, and secure it with
a hex nut. (See Fig. 7)
6. Slip the big tube, cap with the open side
facing downward and the canopy down
through the long nipple, secure them
together with a metal pad, washer,
grounding pad and hex nut. (See Fig. 7)
7. Cut the redundant wires if necessary. Pull
out the outlet wires and the house grounding
wire from the outlet box.
Connections wires: (See Fig. 7)
---Connect the black (hot) wire from fixture
to the black (hot) wire from power source.
---Connect the white (neutral) wire from
fixture to the white (neutral) wire from
power source.
---Attach the fixture grounding wire to the
mounting strap with the green grounding
screw. Then connect it to the house
grounding wire with the wire nut.
Carefully put wires back into the outlet box.
8. Attach the canopy to the mounting strap by inserting the screws, and secure it with the
ball nuts. (See Fig. 7)
9. Install bulbs (included). See relamping label at socket area or packaging for maximum
allowed wattage. (See Fig. 7)
10. Slip the glass shade up through the pull chain and the short nipple, secure them with a
metal pad and hex nut. (See Fig. 7)
11. Slip the cover up through the pull chain and the short nipple, hand tighten until snug.
(See Fig. 7)
12. Turn on the electric circuit.
F0012 / F0013 --- Page 3
F A N C O
131219
Outlet Box
House Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Hex Nut
Grounding Pad
Washer
Metal Pad
Canopy
Ball Nut
Cap
Big Tube
Long Nipple
Hex Nut
Coupling
Lock Nut
Mounting Screw
Installing the fan light on the ceiling:
Fig.7.
hardware package For Semi-Flush
Light Kit
Cover
Bulb Type B
Max.60W (included)
Short Nipple
Glass Shade
Pull Chain
Nipple
Hex Nut
Metal Pad
Cap