Installation Guide

171102
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
H0189
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Installation Steps
Hardware Package (included):
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Important to Know
1. Read all instructions carefully before installation and operation.
2. If you are not familiar with state and local electrical codes, it is recommended that you consult with a qualified electrician.
3. Do not use in wet locations, use indoors only.
4. Non-replaceable LEDs.
5. Caution: LEDs emit bright light. Avoid looking directly into the light source for prolonged periods to avoid eye damage.
6. Do not use any dimming circuit or any other electronically controlled switch on this fixture.
7. Specification:
NO.
1
48 2.25
Dimension(inch)
Item #.
H0189
A
B
C
2.75
Watts
50
A
B
C
45 in
Fig.1
1. Select suitable location that can support the weight of the fixture and has an outlet on the ceiling to insure that the fixture
hangs properly.Determine method of mounting before drilling.Make two spots on the ceiling 45 in. apart for the two
anchors.
Drywall Screw (D)
Pull Chain (E) Lock Catch (F)
Safety Cord (A) Fixator (B)
Anchor (C)