Installation Guide

ManualsBrandsCascadia ManualsChandeliersKimball 6-Light Satin Nickel Industrial Clear Glass Tiered Incandescent Chandelier

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

H0193

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codeds for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Mounting Plate(A)

Mounting Screw (B)

Green Grounding

Fixture Mounting

Screw (C)

Screw (D)

Wire Connector (E)

Ball Nut (F)

Lock Nut (G)

Installation Steps

Turn off the power at fuse or circuit box

1. Secure rods into the threaded pipe of the light.

2. Attach two fixture mounting screws to the mounting plate,

and then secure it with two lock nuts. Adjust the length of

the fixture mounting screws if necessary.

3. Attach the mounting plate to the outlet box using two

mounting screws.

20171130

Outlet Box

Mounting

Mounting Plate

Bulb Type T Max.

40W (not included)

Glass Holder

Ball Nut (F)

Wire Connector (E)

Fixture Grounding

Green

Canopy

House Grounding Wire

Fixture Mounting Screw

Threaded Pipe

Set Nipple

Lighting Fixture

Glass Shade

Lock Nut

Upper Rod

Lower Rod

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS H0193 TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF WARNING: POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codeds for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
4. Rod Connections: a. Thread the fixture wires from the fixture through the lower rod, and then secure the lower rod onto fixture using the threaded pipe. b. Thread the fixture wires through the middle rod, and then secure the middle rod onto the lower rod using the threaded pipe. c. Thread the fixture wires through the upper rod, and then secure the upper rod onto the middle rod using the threaded pipe. d.