Installation Guide

4. Rod Connections:
a. Thread the fixture wires from the fixture through the lower rod, and then secure the lower rod onto fixture
using the threaded pipe.
b. Thread the fixture wires through the middle rod, and then secure the middle rod onto the lower rod using the
threaded pipe.
c. Thread the fixture wires through the upper rod, and then secure the upper rod onto the middle
rod using the threaded pipe.
d. Thread the fixture wires through the fixture canopy, and then secure
fixture canopy onto the upper rod using the threaded pipe.
Note: Height adjustable from 25-3/8" to 79-3/8".
Use fewer rods if shorter length is desired.
5. Adjust the lighting fixture into the same angle as the drawing.
6. Pull out the source wires from the outlet box. Make wire
connections using wire connectors as follows:
---Connect the smooth-coated wire (marked) from the fixture to
the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to
the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with
the green grounding screw, and then connect it to the house grounding wire with a wire connector.
Carefully put the wires back into the outlet box.
7. Attach the fixture canopy to the mounting plate by inserting the
fixture mounting screws, and then secure it with two ball nuts.
8. Install 6*40W Max Candelabra Base Bulbs (not included). Check relamping label at socket
area or packaging for maximum allowed wattage.
9. Attach the glass shade to the glass holder tightly.
10.Angled mounting recommended for a vaulted or angled ceiling. (See Fig. 1)
Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Plate(A)
Mounting Screw (B)
Green Grounding
Fixture Mounting
Screw (C)
Screw (D)
Wire Connector (E)
Ball Nut (F)
Lock Nut (G)
Assembly Kit
5780MM (1 SET)
3103RD (4PCS)
3104RD (1PC)
3105RD (1PC)
A: 32"
9928CE (6PCS)
B: 25-3/8"~79-3/8"
Glass Shade
20171130
H0193
B
A
A: 32"
B: 25-3/8~79-3/8"
Support Brace
Outlet Box
Canopy
Coupling Kit