Installation Guide

1. Attach the Nipple-1 to the mounting strap, and secure
with a washer and a hex nut.
2. Attach the mounting strap to the ceiling box by using two
mounting screws.
3. Unscrew the hex nut and washer out of nipple-2. Install the
grounding wire tab (included) in nipple-2, then secure the
hex nut and washer back. Thread the fixture wire through
the hex nut (included) and loop, then secure the hex nut
and loop. (See Fig.4 & Fig.5)
4. Choose a length of the chain that you need, and weave
the fixture wire and the grounding wire through the chain
links. Connect one end of the chain with the loop using a
loop lock.
5. Secure the top loop to the Nipple-1.
6. Thread the fixture wire and grounding wire through
the collar, canopy, top loop, Nipple-1 and mounting
strap in order.
7. Connect the other end of the chain with the top loop
using the other loop lock.
8. Make wire connections with wire nuts:
---The smooth wire (marked) from fixture to black
wire from power source.
---The ridged wire (unmarked) from fixture to white
wire from power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then
connect it to the house grounding wire with
the wire nut.
Carefully put wires back into the ceiling box.
9. Attach the canopy to the mounting strap by inserting
the top loop, and secure with the collar.
10. Attach the clip of the shade onto the candle tube.
11. Install bulbs (included). See relamping label at socket area or packaging for maximum allowed
wattage.
12. Turn on the power at the main fuse or circuit breaker box.
Installation Step For Mini Chandelier:
Shade
Clip
Candle
Tube
Loop
Fixture Wire
Chain
Nipple-1
Fixture Grounding Wire
Collar
Top Loop
Canopy
Mounting Screw
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Ceiling Box
Loop Lock
Loop Lock
House Grounding Wire
Nipple-2
Hex Nut
Grounding Tab
Nipple-2
Cap
Fig.4
1/2"
Loop
Nipple-2
Hex Nut
Cap
Fig.5
Bulb Type B Max.60W
(included)
LK33053 --- Page 2
F A N C O
120813