Installation Guide

1. Take out the parts from the hardware package For
Semi-Flush.
2. Attach two screws to the mounting strap, and secure
it with two lock nuts. Adjust the length of the screws
if necessary.
3. Attach the mounting strap to the outlet box by using
two mounting screws.
4. Thread the fixture wires through the coupling, hex nut,
short nipple, short tube, cap, canopy, metal pad, washer,
grounding pad and another hex nut.
5. Secure the coupling onto the stem on the top of the
light kit. Then screw the short nipple into the coupling,
then secure it with a hex nut.
6. Slip the short tube, cap with the open side facing downward
and the canopy down through the short nipple, secure them
together with a metal pad, washer, grounding pad and hex nut.
7. Follow steps 3~4 as For Light Kit.
8. Cut the redundant wires if necessary. Pull out the outlet wires
and the house grounding wire from the outlet box. Make wire
connections using the wire nuts:
---Connect the black wire from fixture to the
black wire from power source.
---Connect the white wire from fixture to the
white wire from power source.
---Attach the fixture grounding wire to the
mounting strap with the green grounding
screw. Then connect it to the house
grounding wire with the wire nut.
Carefully put wires back into the outlet box.
9. Attach the fixture canopy to the mounting strap,
and secure it with the bolt nuts.
10. Follow steps 10~13 as For Light Kit.
For Semi-Flush
LK51215 --- Page 2
130122
F A N C OF A N C O
Outlet Box
House Grounding Wire
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
Hex Nut
Grounding Pad
Washer
Metal Pad
Canopy
Bolt Nut
Cap
Short Tube
Hex Nut
Coupling
Lock Nut
Mounting Screw
Stem
Light Kit
E26 medium base spiral
fluorescent Bulb
(Max.13W, incluced)
Coupling
Big Cap
Glass Shade
Hex Nut
Pull Chain
Long Tube
Small Cap
Hex Nut
Decorative Ring
Hex Nut
Cover
Finial
Long Nipple
Short Nipple