Installation Guide

1. Attach two screws to the mounting strap, then secure
them with two lock nuts. Adjust the length of the screws
if necessary.
2. Attach the mounting strap to the ceiling box by using
two mounting screws.
3. Cut the redundant wires if necessary. Pull out the outlet
wires and house grounding wire from the outlet box. Make
wire connections using the wire nuts:
---Connect the smooth wire (marked) from the fixture
to the black wire from the power source.
---Connect the ridged wire (unmarked) from the fixture
to the white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire nut.
Carefully tuck the wires back into the ceiling box.
4. Unscrew two bolt nuts from the canopy(-a), attach the
canopy(-a) to the mounting strap, then secure it with the
bolt nuts.
5. Screw the nipple(-a) into the coupling, then secure it with
a hex nut.
6. Install bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
7. Attach the glass shade and the cap upward to the socket set
by inserting the nipple(-a) and secure them with the finial.
8. Turn on the power at the main fuse or circuit breaker box.
For Semi-Flush
For Pendant:(See Fig.1)
1. Attach the nipple(-b) to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the ceiling box by using two
mounting screws.
3. Thread the fixture wire and fixture grounding wire through
the loop, then secure the loop onto the nipple(-c).
4. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the chain
links. Connect one end of the chain link with the loop by
using the loop lock.
5. Secure the top loop to the nipple(-b).
6. Thread the fixture wire and fixture grounding wire through
the collar, canopy(-b), top loop, nipple(-b) and mounting
strap.
7. Connect the other end of the chain link with the top loop by
using the loop lock.
8. Follow step 3 as for Semi-Flush.
9. Attach the canopy(-b) to the mounting strap by inserting the
top loop, then secure it with the collar.
10. Follow steps 5~8 as for Semi-Flush.
Nipple(-c)
Fixture
Fixture Wire
Chain
Mounting Screw
Nipple(-b)
Fixture Grounding Wire
Collar
Top Loop
Canopy(-b)
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Ceiling Box
Loop
House Grounding Wire
Loop Lock
Loop Lock
Mounting Parts For Pendant
Fig.1
Lock Nut
Ceiling Box
Wire Nut
Screw
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Mounting Screw
Fixture Wire
Canopy(-a)
Bolt Nut
Socket Set
Coupling
Hex Nut
Nipple(-a)
Glass Shade
Cap
Finial
060116
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
OM-CFU160