Installation Guide

1. Pull out the wires and grounding wire from the post. Make wire connections
using the wire nuts:
---The black wire from the fixture to the black wire from the post.
---The white wire from the fixture to the white wire from the post.
---The grounding wire from the fixture to the grounding wire from the post.
Carefully tuck the wires back into the post.
060622
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
OP21505
Ball Nut
Glass Shade
Metal Cover
Post Cap
2. Place the post cap on the post, then secure it with three set screws.
3. Install a bulb (not included). See relamping label atsocket area or packaging
for maximum allowed wattage.
4. Place the glass shade into the metal cover carefully, then attach the metal
cover to the fixture by using two ball nuts.
5
. Turn on the power at the main fuse or circuit breaker box.
Post
Wire nut
Grouding Wire
Set Screw
Fixture Wire
Fixture