Installation Guide

ManualsBrandsCascadia ManualsCeiling LightsBacio Oil Rubbed Bronze Modern/Contemporary Dome LED Pendant Light

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

P0211 / P0212 / P0213 / P0214 / P0215 / P0216

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

161120

Mounting Plate (A)

Green Grounding

Screw (E)

Fixture Mounting

Screw(D)

Mounting Screw (B) Wire Connector (C)

Installation Steps

Lock Nut (F)

Upper Rod

Middle Rod

Lower Rod

Fixture

Ball Nut (G)

Threaded Pipe

Fixture Canopy

Ball Nut (G)

Outlet Box

House Grounding Wire

Wire Connector(C)

Fixture Mounting Screw (D)

Mounting Plate (A)

Green Grounding Screw(E)

Lock Nut(F)

Mounting Screw(B)

Warning: LED electronics can be damaged by

electro static discharge (ESD)shock. Before

installation, discharge yourself by touching a

grounded bare metal surface to remove this

hazard. To avoid damage, do not touch the

LED module.

1. Attach two fixture mounting screws to the mounting

plate, and then secure it with two lock nuts. Adjust the

length of the fixture mounting screws if necessary.

2. Attach the mounting plate to the outlet box using two

mounting screws.

. Rod Connections:

a. Thread the fixture wires from the fixture through the

lower rod, and then secure the lower rod onto fixture

using the threaded pipe.

b. Thread the fixture wires through the middle rod, and

then secure the middle rod onto the lower rod using

the threaded pipe.

c. Thread the fixture wires through the upper rod, and

then secure the upper rod onto the middle rod using

the threaded pipe.

d. Thread the fixture wires through the fixture canopy,

and then secure the fixture canopy onto the upper

rod using the threaded pipe.

Note: Height adjustable from

(16" to 69" for P0211 P0212 P0213)

(13" to 66-1/2" for P0214 P0215 P0216).

Use fewer rods if shorter length is desired

Summary of content (3 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS P0211 / P0212 / P0213 / P0214 / P0215 / P0216 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
4. Pull out the source wires from the outlet box. Make wire connections using wire connectors as follows: ---Connect the black wire from the fixture to the black wire from the power source. ---Connect the white wire from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting plate with the green grounding screw, and then connect it to the house grounding wire with a wire connector. Carefully put the wires back into the outlet box. 5.
PAGE 3
5-YEAR LIMITED WARRANTY: All products are warranted to be free of defects in material and workmanship for five (5) years from date of purchase. This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item(s) is / are returned with proof of purchase date; and (c) it is found upon inspection by us that the item(s) is / are defective as noted above.