Installation Guide

ManualsBrandsCascadia ManualsPost Light PartsCavanaugh 180-Watt 30.5-in Athenian Bronze Distressed Traditional Post Light

Bulb type B Max. 60W

(not include)

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0204

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

151111

Fig.1

Finial (C)

Rubber Pad (D)

Cap(E)

Hex Nut (G)

Washer (F)

Threaded pipe (H)

Wire Nut (B)

Fitter Screw (A)

Hardware Package (included):

Fixture

Grounding Wire

Fixture Wire

Wire Nut (B)

Post

Fitter Screw(A)

Fitter

Set Screw

Threaded Pipe (H)

Finial (C)

Rubber Pad (D)

Cap (E)

Cover

Photocell

Fixture

Clip

Door Glass

Panel

Door Glass Panel

Door

Socket

Candle Tube

Latch

Clip

IMPORTANT:

The sensor has an excellent photocell function to

enable the light to turn on at dusk and off at dawn

automatically.

Washer (F)

Hex Nut (G)

Side Glass Panel

Summary of content (3 pages)

PAGE 1
T0204 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Remove two set screws, and then remove the cover from the fixture. 2. Take a glass panel from the side glass panel package, insert it into the fixture carefully, and then secure it by pressing clips on top side and bottom side of fixture. Repeat with the other side glass panels.(See Fig.1) 3. Attach the cover back to the fixture, secure it with the set screws. 4.
PAGE 3
The following parts are available for re-order if damaged or missing.