Installation Guide

5-YEAR LIMITED WARRANTY:

All products are warranted to be free of defects in material and workmanship for five (5) years from date of

purchase. This warranty is limited to the correction of any such defect, or the replacement of any such defective

item(s), provided that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item (s)

is / are returned with proof of purchase date; and (c) it is found upon inspection by us that the item (s) is / are defective

as noted above. This warranty dose not cover labor costs, consequential damages, nor dose it apply to any item(s) that

have been improperly installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or emplyee(s).

Finishes are specially excluded from the terms of this warranty since they are subject to environmental maintenance

deemed beyond our control. Other than the described obligation, we assume no further liability with respect to the sale

or use of our products.We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness

for a particular purpose.

Page 5 / 5

160909

The following parts are available for re-order if damaged or missing.

Mounting Strap

Wire Nut X3

Decorative cover

Fixture Mounting Screw

A: 9-1/4"

B: 9"

C: 5-3/4"

Troubleshooting

---The light does not come on at all:

1. Make sure the wall switch and circuit breaker are on.

2. Make sure the wiring is correct.

3. Cover the sensor with dark color cloth to verify that the ambient light level is not too high.

---The light comes on for no apparent reason:

1. Re-aim the motion sensor.

2. Decrease the sensitivity setting.

3. Do not use a dimmer or timer to control the light fixture. Replace the dimmer or timer with a standard on/off wall

switch.

---The light flashes on and off:

1. Reposition the light head away from the motion sensor.

2. Reposition the motion sensor.

3. The motion sensor is in “TEST” mode and warm up.

Mounting Screw X2

#8/32X1/2 in

Mounting Screw X2

#6/32 X1/2 in

Mounting Screw X2

#10/24 X1/4 in

Assembly Kit

5349MM (1 SET) FOR T0298

5350MM (1 SET) FOR T0297

5651MM (1 SET) FOR T0299