Installation Guide

A
B
A
B
170628
6. Attach the metal frame to the ceiling pan by inserting the threaded pipe, and then slip up the decorative cover pad with
the open side facing downward through the threaded pipe, and then secure them with the hex nut.
7. Slip up the decorative pad through the threaded pipe, and then secure it with the finial.
Note: Make sure that the decorative pad and the metal frame is side to side during installing decorative pad.
Turn on the power at fuse or circuit box.
A: 14"
B: 6-1/4"
T0336T0335
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
5730MM (1 SET)
Assembly Kit
5519MM (1 SET)
Glass Panel
9902CS
Mounting Screw (B)
Wire Nut (C)
Ball Nut (D)
Cross Bar Unit (A)
Threaded pipe (E)
Decorative Cover (G)
Decorative Pad (H) Finial (I)
Hex Nut (F)