Installation Guide

170822

The following parts are available for re-order if damaged or missing.

Spare Parts List:

A: 9.75"

B: 17.5"

Glass Shade

9898CS(1PC)

Assembly Kit

5727MM(1SET)

1. Turn off the power at the fuse or circuit box before starting installation.

2. Unthred the Fitter Screw and Plate, and then Loosen the wire connectors

connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire conncctors: (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Operation the Unit Without Photocell

Wire Connector (B)

Fitter Screw (A)

Photocell

White Wires From

Photocell

Wire

Connector

Black Wire From

Fixture

Wires From Fixture

Wires From

Main Power

Wire

Connector

White Pigtail

Pigtail

Red Wires From

Photocell

Black Wires From

Photocell

Fig.1

Fig.2

White Wire From

Fixture

Plate

Fitter Screw