Installation Guide
Page 12 / 17
Fig.31
31. Select “ ”, and choose video
quality, included HD and SD.
Fig.32-bFig.32-a
32. Select “info” to show the APP version
information.
Fig.29 and Fig.30 Interoperate (continued):
Select “Off” in “ ”, and select “On” in “ ”:
In the daytime and nighttime, the light turns off all the time, the light camera records video automatically when motion is
detected, and stays on as long as motion continues. The time of recording is at least 1 minute, when the motion is
continue detected, the recording will be saved as time frame, each time frame is no more than 3 minutes.
The range of detection distance is 5 feet to 70 feet by adjusting the sensitivity.
Select “Motion Brightness” in “ ”, and select “Test” in “ ”:
In the daytime and nighttime, when no motion is detected, the light will stay on at low level brightness (0%-50%).
When motion is detected, the light device will record video automatically, and the light will turn on high level brightness
(50%-100%), and return to standby low level brightness after 5 seconds. The time of recording is at least 1 minute,
when the motion is continue detected, the recording will be saved as time frame, each time frame is no more than 3
minutes.
The range of detection distance is 5 feet to 70 feet by adjusting the sensitivity.
Select “Motion Brightness” in “ ”, and select “Off” in “ ”:
At dusk, the light will turn to low level brightness (0~50%) and turn off automatically at dawn. The light camera will
not record video.
Select “Motion Brightness” in “ ”, and select “On” in “ ”:
At dusk, when no motion is detected, the light will stay on at low level brightness (0%-50%). When motion is detected,
the light device will record video automatically, and the light will turn on high level brightness (50%-100%), and return to
standby low level brightness (0%-50%) after the time that you have set (5s~3min). The light will turn off automatically at
dawn. (As minimum recording time per detection is 1 minutes with light on, the motion delay time setting between 5s~
3min will be set the additional period after 1 minute light on time. e.g. motion delay time set to 5s, the light will light on for
1 minute 5 second and go into standby mode.)
On daytime and nighttime, the light camera records video automatically when motion is detected, and stays on as
long as motion continues. The time of recording is at least 1 minute, when the motion is continue detected, the
recording will be saved as time frame, each time frame is no more than 3 minutes.
The range of detection distance is 5 feet to 70 feet by adjusting the sensitivity.
Motion Detected
171019
Dualux Camera
Vaxcel
Vaxcel