Installation Guide

Brief Introduction of Camera Light
Introduction of Camera Light.
1. The Camera Light combines an LED security floodlight with an integrated wireless camera device.
2. The basic function of the wifi camera is to transmit remote video data through a computer network. Using the H.264
hardware compression technique, the transmission speed of high quality video images across the network & internet
can reach 25 frames per second real time.
3. The transmission of wifi camera video data is based on point to point protocol. You can use the Camera Light to
monitor areas in your home and office, or control the camera through network and manage images.
Product Features
1. Integral camera with 1280X 720 HD resolution.
2. Powerful high- speed video protocol processor.
3. High-sensitivity 1/4˝ CMOS sensor.
4. Maximum 1.0 megapixel image resolution.
5. High-brightness LED illumination night vision.
6. Optimized H.264 video compression transmission.
7. Wireless network compatibility (WI-FI/ 802.11/b/g/n).
8. Bi-directional audio monitoring.
9. Still image capture.
10. Real-time recording.
11. Maximum capacity of 64 GB Micro SD memory card. (Micro SD card sold separately)
12. The number of light device to share the same APP is at most 16 sets.
13. One set of light device can support a maximum up to three mobile devices to connect online and monitor at the
same time.
Advanced Features
1. Multiple transport protocols: 128-bit point to point protocols. When the WIFI camera alarm is triggered, it can send
message to you automatically.
2. PIR sensor: Can automatically detect and trigger image recording and transmission.
3. Wifi camera light also provides dynamic DNS function.
4. Advanced user management: Allows only authorized users to access the live video of wifi camera light.
Software Setting
Hardware Information of the Product
1. External View of the Product:
Indicator Status:
■ Green indicator mode: Direct mode.(See Fig.a) (See Fig.b)
■ Blue indicator mode: Route mode.(See Fig.a) (See Fig.b)
■ Factory reset mode: Press and hold the RESET button for 3 seconds, and then hear the prompt tone, the camera
light will be restored successfully.(See Fig.a)
Fig. a
1. Camera
2. LED Indicator
3. Sensor and Photocell
4. Reset
5. Micro SD Card Slot
6. Build-In Speaker
RESET
Micro SD
1
3
5
4
2
6
Page 6 / 17
171019