Installation Guide

The following parts are available for re-order if damaged or missing.
171106
Turn on the power at fuse or circuit box.
A: 12"
B: 5-3/4"
Assembly Kit 5801MM (1SET)
Spare Parts List:
Glass 9937CE
A
B
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green
grounding screw, and then connect it to the house grounding wire with the wire connector.
Carefully put the wires back into the outlet box.
7. Attach fixture canopy to the wall by aligning headless screws on mounting strap with holes on fixture canopy. Slide
headless screws through holes, secure them with two ball nuts.
8. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
9. Attach the glass assembly onto the frame by aligning holes, secure the set screws from the bottom holes of the glass
assembly into the holes in the bottom of the frame.
Green Grounding
Screw (E)
Mounting Screw (B) Wire
Connector (C) Headless screw (D)
Lock Nut (F)
Ball Nut (G)
Mounting Plate (A)