Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0496 / T0497

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

181121

House Grounding Wire

Green Grounding Screw (F)

Wire Connector (C)

Back Plate

Fixture

Mounting Screw (B)

Mounting Plate (A)

Outlet Box

Fixture Wire

Bubble Glass

"U" Strip

Set Screw (D)

Rubber Pad (G)

Bubble Glass

Set Screw (D)

Rubber Pad (G)

Back Plate

Fig.1

Glass Screw

Kit (E)

Back Plate

Fig.2

Green Grounding Rubber Pad (G)

Screw (F)

Set screw (D)

Mounting Screw (B)

Wire Connector (C)

Mounting Plate (A)

Glass Screw Kit (E)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0496 / T0497 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Remove the set screws (D) and to separate the mounting plate (A) from the fixture. Fig.3 Screw 2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B). 3. Pull the bubble glass into the fixture, and then tighten the glass screws kit (E) into the holes of bubble glass.(Fig.1 Fig.2) Back Plate 4. Pull the "U" strip into the fixture, and then tighten the screws into the holes of "U" strip.(Fig.3） 5.