Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
TB33066
Installation Steps
1. Squeeze the arms of the harp together and
fit them into the retainer, then lower the
sleeves to fix them.
2. Attach the shade to the harp, and secure with
the finial.
3. Install a bulb. (Please do not exceed the
maximum capacity that is recommended
on the package.)
4. Insert the plug to the wall receptacle.
5. Control the lamp with the switch.
Harp arm
Shade
Finial
Retainer
Sleeve
Switch
Plug
Base
050625
NOTICE: Purchase the 3-way bulb to have 3-way
switch control:
off 50Watts 100Watts 150Watts.