Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0300

180920

Mounting Screw (B)

Wire Connector (E)

Mounting Plate (A)

Ball Nut (F)

Lock Nut (G)

Headless Screw (D)

Bulb Type A Max.100W

(not included)

Glass Shade

Ball Nut (F)

Socket

Socket Ring

Spacer

Socket Fixer

Mounting Screw (B)

Mounting Plate (A)

Green Grounding Screw (C)

Wire Connector (E)

House Grounding Wire

Fixture Grounding Wire

Headless Screw(D)

Lock Nut(G)

Outlet Box

Fixture Wire

Back Plate

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Hardware Package (included):

Green Grounding

Screw (C)

Glass Bracket

PAGE 1
W0300 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Mounting Plate (A) Mounting Screw (B) Green Grounding Screw (C) Headless Screw (D) Wire Connector (E) Ball Nut (F) Lock Nut (G) Bulb Type A Max.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Thread two headless screws (D) through the mounting plate (A), then secure them with four lock nuts (G) (two on each side of the mounting plate). Adjust the length of the headless screws (D) if necessary. Note: Make sure that the headless screws are lined up horizontally, to ensure that the fixture will be level. 2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B). 3.