Installation Guide

181204
Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
6023MM for W0331 (SN)
6024MM for W0332 (ORB)
Support Rod
3185RD (3 PCS) for W0331 (SN)
3186RD (3 PCS) for W0332 (ORB)
A
C
B
A:26"
B:27"
C:8"
2. Connecting the wires
Note: If you have electrical questions consult your local electrical code for approved ground
methods.
a. Connect the black supply wire to the black fixture wire using a wire connector (C).
b. Connect the white supply wire to the white fixture wire using a wire connector (C).
c. Loop the supply ground wire around the ground screw on the mounting plate (A) and tighten it in
place.
d. Connect the fixture’s ground wire to the supply ground wire using a wire connector (C).
f. Wrap all wire connections with electrical tape for a more secure connection.
3. Mounting the fixture
a. Place the back plate onto the fixture mounting screws (D).
b. Secure the back plate into place by using the ball nuts (F).
c. Attach the steel shade to the fixture and secure it with three support rods.
4. Install a Max.60W bulb (not included).
Fixture Mounting Screw (D)
Mounting Screw (B)
Wire Connector (C)
Lock Nut (E)
Mounting plate (A)
Ball Nut (F)