Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0333 / W0334

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

181204

Turn off the power at fuse or circuit box

Wire Connector (C)

Outlet Box

Fixture Wire

Back Plate

Ball Nut (F)

House Ground Wire

Fixture Ground Wire

Mounting Plate (A)

Lock Nut (E)

Fixture Mounting Screw (D)

Green Ground Screw

Mounting Screw (B)

Max.60W

(not included)

Steel Shade

Socket

Support Rod

Fixture Mounting Screw (D)

Mounting Screw (B)

Wire Connector (C)

Lock Nut (E)

Mounting plate (A)

Ball Nut (F)

1. Mounting the mounting plate

a. Thread the fixture mounting screws (D) into the provided holes of the mounting plate (A).

b. Thread the lock nuts (E) onto the fixture mounting screws (D). Do not tighten the lock nuts (E)

at this time.

c. Pull the supply wires out from the outlet box and mount the mounting plate (A) to the outlet box

using the mounting screws (B).

d. Place the back plate over the outlet box and onto the fixture mounting screws (D).

e. Adjust the fixture mounting screws (D) until they protrude out from the back plate 1/4 in.

f. Remove the back plate and secure the position of the fixture mounting screws (D) by tightening

the lock nuts (E) against the mounting plate (A).

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS W0333 / W0334 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
. Connecting the wires Note: If you have electrical questions consult your local electrical code for approved ground methods. a. Connect the black supply wire to the black fixture wire using a wire connector (C). b. Connect the white supply wire to the white fixture wire using a wire connector (C). c. Loop the supply ground wire around the ground screw on the mounting plate (A) and tighten it in place. d. Connect the fixture’s ground wire to the supply ground wire using a wire connector (C). f.