Specifications

Remote-Control CommandsGPS and Assisted GPS
91Operating Manual 1171.5248.12 ─ 15
[:SOURce<hw>]:BB:GPS:NAVigation:SIMulation[:BEGin]:HOUR <Hour>
Sets the hour of the simulation start. The command is only available if data source Real
Navigation Data is selected (SOURce:BB:GPS:NAV:DATA RND).
Parameters:
<Hour> float
Range: 0 to 23
*RST: -
Example:
BB:GPS:NAV:SIM:HOUR 10
sets the simulation start hour.
[:
SOURce<hw>]:BB:GPS:NAVigation:SIMulation[:BEGin]:MINute <Minute>
Sets the minute of the simulation start. The command is only available if data source Real
Navigation Data is selected (SOURce:BB:GPS:NAV:DATA RND).
Parameters:
<Minute> float
Range: 0 to 59
*RST: -
Example:
BB:GPS:NAV:SIM:MIN 10
sets the simulation start minute.
[:SOURce<hw>]:BB:GPS:NAVigation:SIMulation[:BEGin]:MONTh <Month>
Sets the month of the simulation start. The command is only available if data source Real
Navigation Data is selected (SOURce:BB:GPS:NAV:DATA RND).
Parameters:
<Month> float
Range: 1 to 12
*RST: -
Example:
BB:GPS:NAV:SIM:MON 10
sets the simulation start month.
[:SOURce<hw>]:BB:GPS:NAVigation:SIMulation[:BEGin]:SECond <Second>
Sets the second of the simulation start. The command is only available if data source
Real Navigation Data is selected (SOURce:BB:GPS:NAV:DATA RND).
Parameters:
<Second> float
Range: 0 to 59
*RST: -
Example:
BB:GPS:NAV:SIM:SEC 10
sets the simulation start second.
Satellites Configuration and Satellites Signal Settings