Specifications

Remote-Control CommandsGPS and Assisted GPS
108Operating Manual 1171.5248.12 ─ 15
Parameters:
<Eccentricity> float
Range: 0 to 4294967295
Example:
BB:GPS:LMOD FULL
sets the "Localization" mode to "Full Configuration"
BB:GPS:SVID5:NMES:ECC 1000000
sets the value of the parameter e (Eccentricity)
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:FIFLag <Fiflag>
Sets the parameter curve-fit interval flag of the satellite's navigation message.
Parameters:
<Fiflag> 0 | 1 | OFF | ON
*RST: OFF
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:FIFL ON
enables the curve-fit interval flag
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:HEALth <Health>
Sets the parameter SV health of the satellite's navigation message.
This value does not have an impact on the actual health status of the generated satellite.
Parameters:
<Health> float
Example:
BB:GPS:LMOD FULL
sets the "Localization" mode to "Full Configuration"
BB:GPS:SVID5:NMES:HEAL 10
sets the SV health to 10
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:IDOT <Idot>
Sets the parameter Rate of Inclination Angle of the satellite's navigation message.
As this parameter affects the satellite's orbit, the value selected here also has an impact
on the satellite's parameters "Time Shift", "Doppler Shift" and "Duration (Eleva-
tion>10°)".
The value of this parameters will be updated automatically.
Navigation Message Configuration