Specifications

Remote-Control CommandsGPS and Assisted GPS
110Operating Manual 1171.5248.12 ─ 15
Parameters:
<Izero> float
Range: -2147483648 to 2147483647
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:IZER 100000
sets the parameter i_0
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:LTPData <Ltpdata>
Sets the parameter use of carrier L2 P data flag of the satellite's navigation message.
This value does not have an impact on whether really data is transmitted on the satellite's
carrier L2 or not.
Parameters:
<Ltpdata> 0 | 1 | OFF | ON
*RST: OFF
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:LTPD ON
enables the L2 P data Flag
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:MZERo <Mzero>
Sets the parameter Mean Anomaly at Reference Time of the satellite's navigation mes-
sage.
As this parameter affects the satellite's orbit, the value selected here also has an impact
on the satellite's parameters "Time Shift", "Doppler Shift" and "Duration (Eleva-
tion>10°)". The value of this parameters will be updated automatically.
Parameters:
<Mzero> float
Range: -2147483648 to 2147483647
Example:
BB:GPS:LMOD FULL
sets the Localization mode to Full Configuration
BB:GPS:SVID5:NMES:MZER 100000
sets the parameter M_0
Options: R&S SMx/AMU-K65
[:SOURce<hw>]:BB:GPS:SVID<st>:NMESsage:NDELta <Ndelta>
Sets the parameter Mean Motion difference From Computed Value of the satellite's nav-
igation message.
Navigation Message Configuration